Digital Timer AZB-30 USB
Technical Specification:
- 01 display LDC 2 × 16 with backlight;
- Resolution 0,00001s (1uS);
- 2 digital inputs / outputs for connecting up to 2 photoelectric sensors;
- Polarized output connection to coil with 8,5V / 1.5A
- Memory for storage of measurements of each function;
- The on / off button;
- Button for momentary retention and coil shooting;
- Short-circuit protection;
- Power supply with switched input 110 / 220V output with low voltage of 12V / 2A with connection plug NBR 14136;
- Polycarbonate panel with display protector transparent LCD and touch type buttons;
- Mounted enclosure;
- Detection system and the sensors;
- USB connection and software for data acquisition.
- Three functions:
Data Acquisition Software AZB-30 USB
Minimum requirements:
Storage System:
Specially designed to facilitate the organization, transport and storage of parts that make up the set. The system is composed externally of a box made of corrugated Kraft paper. Internally, the system has a high strength cradle plastic thermoformed with cavities in the shape of parts for perfect fit and storage.
Composition:
- 01 large tripod with leveling shoes;
- 01 2N dynamometer precision 0.02N;
- 01 spool of thread;
- 01 12V tractor system with variable source motor and rotation reducer with aluminum pulley fixed to the motor shaft. Motor system with electronic speed control mounted on metal bracket with position for photoelectric sensor, the entire panel is fixed with an aluminum clamp with plastic head handle.
- 01 swivel system couplable to the tractor by rubber belt consisting of a Ø12.7mm stainless steel rod with aluminum pulley fixed at one end of the rod with bearing system and threads that secure the pulley system without backlash;
- 01 switched source 12V / 2A;
- 01 50cm U-shaped turntable, made of metal with electrostatic paint finish, has side openings (guides) for fixing accessories, has aluminum pin at the bottom for attachment to the swivel system;
- 01 metal tower to fix dynamometer with guide pins and holes for fixing to the turntable;
- 01 metal tower for hanging cylindrical brass specimen with guides and holes for fixing to the turntable;
- 01 specimen for centripetal force, consisting of a 100g brass cylindrical with two Ø5mm threaded pins and knob fixed on each central face of the cylinder and with three opposite 90º fixed hooks on the side of the cylinder; brass gauge with 50g and central hole of Ø5mm.
- 02 metal specimens (ØxE) 52x4mm and 5mm center hole with bicolorized finish weighing 100g each;
- 03 rod (ØxC) 1 / 4x120mm with M5x10mm thread;
- 01 manual stopwatch with accuracy of 0.01s;
- 01 2-milled spoked pulley fixed to sheet metal for connection to turntable;
- 01 measuring tape 3m;
- 01 metal disc (ØxE) 100x1mm with 12 windows for measuring 12 time intervals around the complete platform, electrostatic painting finish;
- 01 metal fixer for photoelectric sensor coupled to the tractor system for time measurement using the streaked disk;
- 01 steel rod with bicolorized finish (ØxC) 12,7x400mm;
- 09 through knob m5;
- 01 handle of nickel plated brass m6x12;
- 01 metal clip to fix dynamometers with metal handle with nylon protection;
- 02 mass of 50g with quick coupling hook;
- 03 aluminum clip with two handles for fixing rods;
- 09 commercial flat washer 3/16 stainless steel;
- 05 plastic head handle m5x15;
- 05 plastic head handle m5x20;
- 01 plastic head handle m5x30;
- 10 type S hook;
- 01 metal sensor nut;
- 01 aluminum rod for sensor;
- 01 rubber belt;
- 01 plastic organizer box with 5 divisions with size of 136x88x32mm;
Studies:
– Uniform circular motion.
– Centripetal force.
– Centripetal force in function of the radius.
– Centripetal force as a function of mass.
– Centripetal force on the time.
Product Manual | Yes |
---|---|
Warranty | 1 year |
Packing | Select one of the product configuration options to see the packaging size. |
Information | For more information about our warranty click here. |